Available TBW Options

The following options are specifically designed to work in conjunction with the TBW-Line of Vehicle Washing Systems. Each of the items listed are quoted on an individual basis. Contact TBW at 1-800-600-6020 for pricing information or by sending the Request Form found on the Contact page.

 

 

Select the Options from the following Index:

tribullet.gif (175 bytes)

AUTOMATIC TOUCHLESS AIR DRYER


Standard Features Include:

Minimum space requirements
Plenum Ductwork - fabricated from Aircraft-grade Aluminum
Per-Duct Air Pillows - fabricated from durable canvas and nylon (5-Year Warranty)
Two 25 HP Blower Motors with Corrosion Resistant Casings
Service Factor of 1.25 on Motor - low amp draw for user frequency

tribullet.gif (175 bytes)

AUTOMATIC DOOR CONTROLS
Standard Features Include:

(2) Sets of door mounted hardware (does not include door openers)
(2) Traffic Lights with necessary hardware - 1 mounted on the Building exterior and 1 mounted on the Gantry exterior.
Photo-Electric Transmitters for Automatic Operation
Program Logic Control (PLC) Programming to meet site-specific requirements

tribullet.gif (175 bytes)

TBW ROTATING COMMERCIAL CHASSIS WASHER


Standard Features Include:

(2) STAINLESS Steel Rotating Spinners (3 Year Warranty)
Self-Priming Positive Placement Pump capable of delivering 28 GPM @ 750--1000 PSI
Spray Pump driven by 15 HP, 3 Phase, ODP Motor
Wash Spinners mounted under floor (spinner heads flush with pad floor)
Photo-Electric Eye Activated Auto-Start with Manual Override
On/Off Selector Switch located on Push Button Control Panel

Note: Chassis Washer is located near the entrance of Wash Bay.

tribullet.gif (175 bytes)

TBW AUTOMATIC ROTATING HIGH-PRESSURE WHEEL WASHER
Automatically stops at each wheel during rinse cycle and thoroughly cleans each wheel for an adjustable timed duration.
Standard Features Include:

(2) Rotating Spinner Heads containing (5) high pressure nozzles each
Self-Priming Positive Placement Pump capable of delivering 28 GPM @ 750--1000 PSI
Spray Pump driven by 15 HP, 3 Phase, ODP Motor
Stainless Steel Mounting Components
Stainless Steel Pipe mounted directly inside both sides of the Gantry
100 FT of High-Pressure Hose to be incorporated with existing festoon system
Automatic or Manual Operation
Adjustable Timed Duration for wheel cleaning cycle
On/Off Selector Switch located on Push Button Control Panel
Photo-Electric Transmitters for Automatic Wheel Detection

tribullet.gif (175 bytes)

TBW PRE-SOAK HEATED WATER DETERGENT ARCH


Standard Features Include:

Steel "A" Frame Galvanized Arch Expansion anchored to concrete (can also be gantry-mounted)
"A" Frame Engineered to Handle Double Spray Arch with 3--4 ft. separation (can also be gantry-mounted)
(2) Spray Pipes mounted 3--4 ft. apart for complete pre-soak coverage
Spray Pipes Angled Design to ensure optimum application to all areas of the vehicle
Stainless Steel Flat-Fan Nozzles
Hydrominder with 30 Gallon Holding Tank
1500 WATT Emersion Heater and Pumps
Photo-Electric Eyes for Automatic Vehicle Detection
Manual On/Off Switch

Optional Gas or Electric Water Heaters Also Available

tribullet.gif (175 bytes)

TBW WATER SOFTNER SYSTEM
Standard Features Include:

Minimum 60,000 Grain Softener
Twin Tank Design (eliminates regeneration down time)
Automatic Regeneration based on flow of water used

tribullet.gif (175 bytes)

R.O. SPOT FREE RINSE SYSTEM
Standard Features Include:

Free Standing Unit Constructed of Brushed Stainless Steel
Full Instrumentation
Incoming Pressure Gauges, System Pressure Gauge, and System Flow Meters
Water Test Petcocks in front of unit
Sediment Inlet Filter 1800 GPD Production of R. O. Water


tribullet.gif (175 bytes)

FULL LENGTH 4' GUIDE RAIL & ROTATING GUIDE RAIL

tribullet.gif (175 bytes)

COMMERCIAL VACUUM SYSTEM
Standard Features Include:

Stainless Steel Canister
Dual Motor System
Dual Door Opening for easy dirt removal
Four separate bags for precise suction
75 ft. of 2 in. hose
On/Off Switch

tribullet.gif (175 bytes)

AUTOMATIC STARTING SYSTEMS
Standard Features Include:

Card Readers
Token Acceptor
Vehicle Identification / (Push Button)
Vehicle Positioning

tribullet.gif (175 bytes)

TBW VEHICLE WASH CODE SYSTEM
Standard Features Include:

Interfaces to all TBW Vehicle Washing Systems
Waterproof Membrane Key Pad
Stainless Steel Enclosure
Stainless Steel Stand
Built-in Intercom
No Active Electronics in Console
High-Intensity Color L.E.D. Readout (remains visible in sunlight)
Interfaces to Fuel Pumps
Daily Total Reporting with One Year History
Three-Shift Tracking Capabilities
Issues up to 100,000 different codes
Detailed Code History for Security
Fixed Code Capability
Fleet Wash Capability (Codes are valid for more than one-time use)
Remote Activation of vehicle to be washed (verify code and start)
Code Cancellation ( complete with auditing)
Enable/Disable Stacking
Ticket Validation Time (1--99 days)
Issues Codes up to Two Discount Levels
Capable of Issuing Rain Check Washes

 
 

Home | Wash Equipment | Water Reclaimation | Options
Support Equipment
| Technical Info | References | Contact Us

You can reach us by phone at 1-800-600-6020 or by E-mail at: info@vehiclewash.com

© Copyright 1999—2005 TBW Inc.    All Rights Reserved.
Trademarks shown are the property of their respective owners.

 

 


USED EQUIPMENT
Now available from TBW. Click here for Complete List